When using a professional microphone on stage or in the studio, the Engineer needs to have control from the mixing desk. If a mic ON / OFF switch position is changed without the Engineers knowledge, it can lead to big problems!
The DM5.0Pro solves this problem. It has no switch. With an “all-black” design, the DM5.0Pro is discrete on-stage and does not detract from the performance.
DM5.0Pro uses the same great sounding capsule from the DM5.0s. It also uses the same great road-ready construction as the DM5.0s but, without the potential confusion which can be caused by a switch.
Drums, guitars, brass and vocals – a DM mic does the job! In addition it is made to cut through the mix for detailed live vocal performance. High SPL capabilities combined with a super cardioid pickup pattern means the microphone can produce high gain before feedback and a high signal to noise ratio.
FEATURES AND DETAILS
Robust dynamic supercardioid microphones
Advance redesign in build and quality.
Higher SPL capabilities
High performance capsules
Low distortion
Tailored for vocals
Also suitable for drums, guitar cabs and other high SPL sound sources
Single and multipacks available
Rugged cast metal bodies
Steel mesh grilles
Internal pop shields
SPECIFICATIONS
Transducer type : Dynamic
Frequency response : 50Hz - 12kHz
Polar pattern : Unidirectional
Output impedance : 600Ω
Sensitivity : -51dB (0dB = 1v / Pa)
Off axis rejection : >20dB at 180°
Maximum SPL : >135dB
Cable / connector (Mic) : 3-pin gold plated XLR male
